Methods of maximizing the value of wood pellet press

Wood pellet press is a new energy-efficient equipment that mainly applies to granulation of coarse fiber, such as sawdust, rice husk, cotton stalk, cottonseed husk, weed and other crop stalks. Besides, domestic waste, waste plastics and factory waste can be processed into pellets or briquettes by the machine, although these raw materials have low adhesion rate and are difficult to shape. What’s more, Wood pellet press is also suitable for low temperature granulation of fertilizer, these fertilizers include biological fertilizer, organic fertilizer, compound fertilizer and so on.

In terms of production of wood pellets, granulation system is an important part of the whole processing process, and also wood pellet press is the key equipment in granulation system. The running conditions and operation methods of wood pellet press are very important, which directly influence the quality of finally products. The production capacity of wood pellet press is also quite important for wood pellet fuels producers, because without increasing the number of workers, an increase in output means more profits. So the manufacturers of wood pellet press improve the quality of pellets and the capacity of pellet press to maximize the value of wood pellet press.

How to maximize the value of wood pellet press?

With over ten years’ experience and theoretical knowledge, GEMCO teach you to maximize the value of wood pellet press. A qualified worker must firstly master the operation system of wood pellet press. Methods of maximizing the value of wood pellet press are as follows.

• You need to control the size of raw materials. In order to prohibit oversized raw materials come into granulation room of wood pellet press, these raw materials should be sieved in advance.
• The granularity of the materials to be processed should have a certain proportion. In general, raw materials with diameter of 4mm are all ok.
• Super hard materials are prohibited into the granulation room, at the same time, non crushed materials are also prohibited into the granulation room in the process of production.
• Controlling moisture content of raw materials. Materials with high water content should be exposed to the sun and dried for avoiding adhesion of raw materials.
• The moisture content should be controlled from 15% to 18%. The purposes are improving production efficiency，prolonging the service life of flat die and reducing energy cost.

Matters needing attention

The working parameters of wood pellet press have an immediate impact on the movement characteristics of raw materials, and then have an important impact on the production efficiency of the equipment, so it is necessary to ensure the reasonable working parameters of the equipment in production. In order to improve the production efficiency of wood pellet press, the flat die and roller can be designed and improved, and then equipped with the best working parameters. It can realize the match of raw materials and mold, which helps to maximize the value of wood pellet press.

The quality of made pellets and the yield of the pellet fuels are closely related to the quality of the workers. If the workers want to produce qualified pellet fuels, they need to know the changes of the circumstance temperature and humidity, moisture content of raw materials, the changes of raw materials granularity, recipe adjustment, equipment wear and special requirements of the customer. Thus, Workers must have more comprehensive knowledge, rich experience, strong sense of responsibility, and overcome various difficulties for producing high-quality and high-efficient pellet fuels.

GEMCO wood pellet press

GEMCO can provide customized wood pellet press according your needs. The quality is reliable and the price is attractive. Please contact us if you are interested in maximizing the value of wood pellet press.