Why do customers choose to buy a biomass pellet press?

Biomass pellet press is one kind of biomass energy pretreatment equipment. The waste during processing of agriculture and forest such as wood chips, straws, rice husks and bark, are mainly used as raw material. The biomass materials can be solidified into high-density pellet fuel by pretreatment and processing.
The biomass pellet press can be divided into the flat die pellet press and the ring die pellet machine.

Advantages of biomass pellet press

Along with the government’s comprehensive control of the energy and environment, straw fuels (also can be called biofuels) use the crops of corn stalk, wheat straw, rice straw, peanut shell, corn cob, cotton, soybean pole, weeds, branches, leaves, sawdust, bark and other solid wastes as raw materials. The raw materials finally become a small stick solid fuel after crushing, pressing, dense and molding. Pellet fuel is made by extruding wood chips, straw and other raw materials under normal temperature with press roll and the ring mold. The density of the raw materials is generally about 0.6 ~0.8. The density of materials which are after molding is greater than 1.1. They are extremely easy to transport and storage. At the same time, Their combustion performance are greatly improved, also reduce human's dependence on fossil fuels and atmospheric emissions.

The correct use methods of pellet press

1. The biomass pellet mill should be fixed on cement based if long-term operation.
2. After the installation of the biomass pellet mill, we must check the fastening conditions of all the parts. Be sure to tighten them if they are loose.
3. Before starting the biomass pellet mill, please manually operate it to check whether its operation is flexible and reliable, whether there is collision in the machine. Make sure that the motor and pellet mill are well lubricated.
4. Don’t replace the mill parts casually.
5. Please idling the crushing machine after starting, Make sure there is no abnormality and then proceed to normal work after confirming that there is no abnormality.
6. Pay attention to the operation of the biomass pellet mill during work, and the feeding should be uniform. If any abnormality is found, immediately stop the machine for inspection and continue to work until the trouble is resolved.
7. The crushed materials should be carefully checked to prevent accidents caused by copper, iron, stones and other hard objects into the crushing chamber. When the operator sends the material, please stand on the side of the pellet press in order to prevent the rebound sundries to injure the face.
Machining process
Collect the raw materials→Raw materials crushing →Drying→Pelletize and molding →cooling→ screening→ packing

Characteristics of biofuel

After forming, the biofuel has the characters such as large proportion, small volume, flame resistance, and it is easily to store and transport. After molding, the density is 1.1-1.5 and the calorific value can reach 3400~4800 CAL. It is a solid fuel with high volatile content and low sulfur content.

The use of biofuel

The formed biofuel is a new type of biological energy, they can replace wood, coal, oil, liquefied petroleum gas, etc., they are widely used in heating, life stoves, hot water boiler, industrial boiler, biomass power plant, etc.

The market biofuel

The main agricultural residues and most forest residues can be used as good raw materials for biomass fuel. The biomass fuel has great potential of using. At the same time, their combustion performance are greatly improved, all this bring about certain economic benefit and solve some employment problem. Moreover, as the biomass fuel for renewable energy, it can not only supplement the shortage of conventional energy, but also have significant environmental benefits. Compared with other biomass energy technologies, it is easier to achieve mass production and use.