What will affect the efficiency of wood hammer mill?

Wood hammer mill is a relatively simple machine in all the pelletizing machines.But it is inevitable that there will be a problem of inefficiency.So what is the cause, let's find out.
The selection of raw material

The wood hammer mill is a relatively simple machine in all the granulating machines, but it is inevitable that the problem will be inefficient. The growth structure and material density of different raw materials are different, so the crushing difficulty is also different. Such as straw, weeds and so on is easier to smash wood such as mahogany, pine wood, and other material that are not easily crushed.Therefore, the selection of raw materials has an impact on the yield of straw hammer mill.

Powder size

As we all know, a wood hammer mill has a variety of screen nets, according to the different grain size, the screen mesh is different. The particle size of different particles is not the same. If the particle size is small, the material that does not meet the requirements will continue to be crushed in the silo.it will be leak out of the screen until the material is meshed into the size that meet the requirement. Therefore, the size of the raw material will also affect the yield of wood hammer mill.

The water content of the material.

Harvesting the wet wheat is not easy than harvesting the dry wheat, the dry branches must be more vulnerable than the branches that have just been cut down, it's all because of the difference in water content. The high water content is not only crushed and the output is reduced, but it is easy to block the screen if the material particles are too small.So we say that the raw materials with high water content should be dried and then crushed, and it will be easy to handle.

The dynamic problem of the wood hammer mill

The different models are usually equipped with a suitable motor. the increase in power does not improve the production of the equipment completely, it may also damage the crusher. When buying a wood hammer mill, it is more important to choose the power to suit yourself.

How to increase the efficiency of wood hammer mill?

• Some changes have been made inside the equipment, add blade in the comminuted chamber. Through the rotation of the blade, the volume of air discharge is increased, and the temperature is reduced, so the output is greatly increased.
• The material of the collection bag was adjusted. Adopt a new kind of collection bag made of material with large mesh and good air permeability. It can increase the volume of ventilation, discharge the heat quickly, and increase the capacity.
• Rational use of the back burr of the sieve. Put one side of the burr on the inside, it can increase friction. But it won't take long, after the burr is polished, the efficiency is no longer.It lasts about 30 minutes to an hour.

Wood hammer mill is the most important process before making wood pellets. It is very important to improve the working efficiency of the pulverizer to improve the granulation. It is good for the whole work to find out the reasons for your inefficiency and change it at the right time.