How to avoid making poor condition sawdust pellet?

Our company is a manufacturer specializing in the production of sawdust pellet press. Sawdust pellet press have gained more and more recognition from customers in the market.

Sawdust pellets have the following applications:

First, it can be used home heating and used a s living energy. With it’s high burning rate, there is no problem in heating and cooking.
Second, sawdust pellets can also be used as the main fuel for industrial boilers. Sawdust pellets can replace coal, which have the ability to reduce environmental pollution.
Third, sawdust pellets can be used for electricity generating. They can be used as fuel for thermal power generation.
Fourth, the sawdust pellets pressed by the sawdust pellet press are easy to store and transport, which can reduce the user's investment costs.

In addition, the composition index of the sawdust pellet is: the calorific value is greater than 4000 kcal/kg, the density is less than 1.1 tons/cubic meter, the finished shape of the sawdust pellet machine is a cylindrical state, and the diameter is 6mm-8mm.
Sawdust pellet press focus on producing biomass pellet for home use and boiler fuels. Sawdust pellet press draws the advantages of its peers, coupled with the unique design of engineers, wins a highly prise among customers. How can farmers deal with the sawdust and other agricultural waste after harvest ? Use sawdust pellet press. Sawdust press is made of high-quality steel. The output of sawdust pellet press ranges from 40 kg per hour to 800 kg per hour. The driven force of the pellet press is also different in order to meet different requirements. Sawdust pellet press also has high quality and perfect after-sales service. Sawdust pellet press is simple to operate and easy to use.
Many farmers have begun to use sawdust pellet press in order to deal with agricultural waste and make fuel for home use. However, it is unclear how the prophet sawdust pellets failed.

From what aspects you can see that the sawdust pellets have failed?

First, when you found that the pellets cut surfaces were uneven and even that there were a lot of extra wounds on the pellets during the working of pellet press. This problem indicated that the blades inside the pellet press has problems. If the blades were sharp enough, the cut surfaces of the produced pellets were very smooth and all pellets are almost equal in size.
Second, the surface of the pellet is too smooth, which is also a problem. This phenomenon is rare and rarely encountered. This problem, but also as early as possible to avoid the construction, the first thing to do is to check the material before pelletizing to see if there is any hard objects.

Thirdly, blocking of the machine often occurs when the moisture content of the raw material is too high. Therefore, we try to pelletizing after testing the moisture of the particles. If the sawdust raw material has high moisture content, we must dry it out to avoid over load of pellet press when the material is wet. This will increase the load on the machinery and affect the normal operation of the sawdust pellet press.

GEMCO has been working on all kinds of pellet press for many year. As you can see in our website, we have customers order our small pellet press every week. As an expert company from China, we have the advantage of low price but high quality, even the tread war between China and America did not influence our sale volume all over the world. If you want to buy a pellet press, do not hesitate to contact us, we will provide your the pellet press and the price that satisfies you.