How to reduce damage of pellet press spare parts?

Pellet press spare parts are mainly roller and die. Pellet press roller and die can be said to be one of the most important parts of flat die pellet press machinery. In the process of pelletizing of flat die pellet press, the key effect occurs between roller and die. The operator should operate in a normative way to reduce the damage of the main parts of the flat die pellet press to extend its service life, reduce the cost of feed processing, increase production profits. Today, we are going to discuss from the flat die pellet press machine protection about how to increase the life of flat die pellet press.

how to protect the die from damage?

• The raw material used for processing must be carefully screened, to ensure that the material doesn’t contain iron impurities and then being used to produce the granulation.
• Smash raw material into proper size to achieve the best pelletizing effect. Raw material after crush should meet the pelletizing requirement. Make ensure that the pellet size of the crushed material in the flat die pellet press machine most suitable for the suppression range.

We also sale different kinds of wood chipper to help you with smashing the raw material.
Disc-type wood chipper: The disc chipper series products widely be used in biomass manufacturing plant, pulp mill, paper mill, wood fiber board factory, industry and the factory stock shop etc. As the preferred equipment for production of wood chip. The adjustable material: The diameter is under 120mm leaf and the width under 160-180mm bark and offal of screwing machine etc.
Drum-type wood chipper: Wood drum chipper is an equipment especially for making wood chips, it suitable for biomass processing plant, paper mill, chipboard mill, fibreboard mill, wood chip production and wood chip export base. It can make log, small diameter wood etc as same length, kerf smooth, thickness uniformity  wood chips for industry. It also can cut branch, panel etc.

• In the process of production and processing for the flat die pellet press machine equipped with a powerful cooling system (counter-current cooler) to reduce the temperature inside the mechanical granulation, making the flat die granulator grain, mold and the pressure roller works efficiently at the right temperature.
• Ensure uniform feeding speed during the production process, suddenly slow feed or fast feed are prohibited. Avoid the material produce too much accumulation in the granulation bin.
• Keep in mind: choose an experienced wood pellet press machine manufacturer to buy flat die pellet press and spare parts, because only the equipment of these manufacturers can meet the requirements in order to have a good quenching process in order to have quality assurance.

Why choose GEMCO pellet press spare parts

• GEMCO pellet press adopts superior alloy steel in their spare parts, both roller and die.
• The die can be used both sides which can double the service life of the die.
• With thousands time of experiment and test, the die is ensured to have the best compression ration for more than 30 kinds of raw material.
• The flat die is proved to be used for 800 hours, which means 400 hours per side.
• After the weariness of the old die, we suggest you to contact the original supplier to order spare parts. We can provide you bran new spare parts anytime.   
• The working duration of our roller is about 1000 hours, but we recommend you to change both roller and die at the same time or else it is hard for them to fit each other.
• GEMCO is able to provide rollers of different dimensions to meet processing demand of various raw material
• We offer thoughtful pre-sale and after-sale service, ready to meet any of your request. We guarantee timely delivery.