How to maintain and support pellet machine

The wood pellet machine is the manufacturer of biomass energy. How to maintain and support the wood pellet machine? Let us introduce it to you.

• First of all, not as much as possible. A piece of equipment is rigorously stipulated in the design of the amount of fuel, the operator should supplement the smooth oil according to the clarification and daily inspection of the oil mark, sight glass, etc. If more oil is added, it will have a certain counteraction. For example, the air compressor has too much oil in the crankcase, which increases the resistance of the crankshaft. In the gearbox, in order to reduce the resistance of the gear and avoid the rise of the oil temperature, the depth of the gear immersed in the oil is 1~2 teeth. If it is high, it should be shallower when the speed is high; when filling the rolling bearing, it is impossible to fill the bearing cavity completely, otherwise it will increase the running resistance of the bearing, it is easy to generate heat, the oil temperature rises, the grease flows away, and the grease is smoothed. Bad or damaged bearings.

• Remember to use the waste oil that cannot be directly used by the wood pellet machine. After stopping the oil quality analysis, some measures can be taken. However, we must pay attention to not to directly participate in the waste oil, which will increase the damage to the pellet machine. If the waste oil from the wood pellet machine can be used to smooth the oil in the oil, it can be dehydrated by oil and water; Mechanical impurities and sludge in smooth oil can be removed by a filter.
• It is not suitable for any smooth oil. When designing a pellet machine, the designer rules the smooth oil used in the pellet machine according to the mechanism of the pellet machine, instead of all the smooth oil can play a smoothing effect. In order to make the equipment reasonably smooth in different environments, it is necessary to participate in a certain amount of additives in the smooth oil. The additives added by various smooth oils are different, and the performance is also different, so it depends on the condition and application of the equipment. The environment selects a suitable smoothing agent to achieve a good smoothing effect.